-
Slivers, rovings, yarn and chopped strands and mats thereof
-
Chopped strands, of a length of not more than 50 mm20%7.00 %7019110000
-
Rovings
701912
-
Rovings which are impregnated and coated and with a loss on ignition of 3% or more (as determined by the iso standard 1887)20%6.00 %7019120003
-
Other
-
Rovings, measuring 650 tex or more but not more than 2 500 tex, coated with a layer of polyurethane whether or not mixed with other materials20%7.00 %7019120022
-
Rovings ranging from 1 980 to 2 033 tex, composed of continuous glass filaments of 9 μm (± 0.5 µm)20%7.00 %7019120025
-
S glass stratifils:
- composed of continuous glass filaments of 9 µm (±0.5 µm),
- measuring 200 tex or more but not more than 680 tex,
- not containing any calcium oxide, and
- with a breaking strength of more than 3 550 mpa determined by astm d2343-09
for use in the manufacture of aeronautics20%7.00 %7019120026 -
Other20%7.00 %7019120039
-
-
-
Other yarn, slivers
701913
-
Of filaments
-
Yarn of 33 tex or a multiple thereof (± 7.5%), obtained from continuous spun-glass filaments of a nominal diameter of 3.5 µm or of 4.5 µm, in which filaments of a diameter of 3 µm or more but not more than 5.2 µm predominate, other than those treated so as to improve their adhesion to elastomers20%6.00 %7019130010
-
S-glass yarn of 33 tex or a multiple of 33 tex (± 13%) made from continuous spun-glass filaments with fibres of a diameter of 9 µm (- 1 µm / + 1.5 µm)20%6.00 %7019130015
-
Yarn of 10.3 tex or more but not more than 11.9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4.83 μm or more but not more than 5.83 μm predominate20%6.00 %7019130020
-
Yarn of 5.1 tex or more but not more than 6.0 tex, obtained from continuous glass-spun filaments, in which filaments of a diameter of 4.83 µm or more but not more than 5.83 µm predominate20%6.00 %7019130025
-
Yarn of e-glass of 22 tex (± 1.6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 µm, in which filaments of a diameter of 6.35 µm or more but not more than 7.61 µm predominate20%6.00 %7019130030
-
Yarn of 11 tex or a multiple thereof (± 7.5%), obtained from continuous spun-glass filaments, containing 93 percent by weight or more of silicon dioxide, of a nominal diameter of 6 µm or 9 µm, other than those treated20%6.00 %7019130050
-
Other
-
-
Other
-
Of filaments
-
Mechanically bonded mats
701914
-
Chemically bonded mats
701915
-
Other
701919
-
-
Mechanically bonded fabrics
-
Closed woven fabrics of rovings
701961
-
Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30°c and 120°c (measured according to ipc-tm-650) of:
- 10ppm per°c or more but not more than 12ppm per°c in the length and width, and
- 20ppm per°c or more but not more than 30ppm per°c in the thickness, with a glass transition temperature of 152°c or more but not more than 153°c (measured according ipc-tm-650) -
Prepreg sheets or rolls containing polyimide resin
-
Other
-
Open mesh fabrics of glass fibres, of a cell size of more than 1.8 mm both in length and in width and weighing more than 35 g/m², excluding fibreglass discs20%6.00 %7019610050
-
E-fibre glass fabrics:
- having a weight of 20 g/m² or more, but not more than 214 g/m²,
- surface treated with an organosilane coupling agent,
- in rolls,
- having a humidity content by weight of 0.13% or less, and
- having not more than 3 hollow fibres out of 100 000 fibres,
for the exclusive use in the manufacture of prepregs and copper clad laminates20%6.00 %m²7019610070 -
Other
-
Fabrics of continuous filament glass fibre rovings, whether or not stitched, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Other20%6.00 %7019610085
-
Fabrics of continuous filament glass fibre rovings, whether or not stitched, excluding products which are impregnated or pre-impregnated (pre-preg)
-
-
Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30°c and 120°c (measured according to ipc-tm-650) of:
-
Other closed fabrics of rovings
701962
-
Waste and scrap
70196210
-
Fabrics of stitched continuous filament glass fibre rovings or yarns, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Other20%4.00 %7019621085
-
Fabrics of stitched continuous filament glass fibre rovings or yarns, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Other
70196290
-
Fabrics of stitched continuous filament glass fibre rovings or yarns, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Other20%4.00 %7019629085
-
Fabrics of stitched continuous filament glass fibre rovings or yarns, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Waste and scrap
-
Closed woven fabrics, plain weave, of yarns, not coated or laminated
701963
-
Open mesh fabrics of glass fibres, of a cell size of more than 1.8 mm both in length and in width and weighting more than 35 g/m², excluding fibreglass discs
-
E-fibre glass fabrics:
- having a weight of 20 g/m² or more, but not more than 214 g/m²,
- surface treated with an organosilane coupling agent,
- in rolls,
- having a humidity content by weight of 0.13% or less, and
- having not more than 3 hollow fibres out of 100 000 fibres,
for the exclusive use in the manufacture of prepregs and copper clad laminates20%6.00 %m²7019630030 -
Other
-
Fabrics of continuous filament glass fibre rovings or yarns, whether or not stitched, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Other20%6.00 %m²7019630085
-
Fabrics of continuous filament glass fibre rovings or yarns, whether or not stitched, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Open mesh fabrics of glass fibres, of a cell size of more than 1.8 mm both in length and in width and weighting more than 35 g/m², excluding fibreglass discs
-
Closed woven fabrics, plain weave, of yarns, coated or laminated
701964
-
Open mesh fabrics of glass fibres, of a cell size of more than 1.8 mm both in length and in width and weighting more than 35 g/m², excluding fibreglass discs
-
Epoxy resin coated glass woven fabric containing by weight:
-91% or more but not more than 93% of glass fibres,
-7% or more but not more than 9% of epoxy resin20%6.00 %m²7019640040 -
Other
-
Fabrics of continuous filament glass fibre rovings or yarns, whether or not stitched, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Other20%6.00 %m²7019640085
-
Fabrics of continuous filament glass fibre rovings or yarns, whether or not stitched, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Open mesh fabrics of glass fibres, of a cell size of more than 1.8 mm both in length and in width and weighting more than 35 g/m², excluding fibreglass discs
-
Open woven fabrics of a width not exceeding 30 cm
701965
-
Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30°c and 120°c (measured according to ipc-tm-650) of:
- 10ppm per°c or more but not more than 12ppm per°c in the length and width, and
- 20ppm per°c or more but not more than 30ppm per°c in the thickness, with a glass transition temperature of 152°c or more but not more than 153°c (measured according ipc-tm-650)-
Open mesh fabrics of glass fibres, of a cell size of more than 1.8 mm both in length and in width and weighting more than 35 g/m², excluding fibreglass discs
-
Other20%6.00 %7019650019
-
Open mesh fabrics of glass fibres, of a cell size of more than 1.8 mm both in length and in width and weighting more than 35 g/m², excluding fibreglass discs
-
Prepreg sheets or rolls containing polyimide resin
-
Other
-
Open mesh fabrics of glass fibres, of a cell size of more than 1.8 mm both in length and in width and weighing more than 35 g/m², excluding fibreglass discs20%6.00 %m²7019650050
-
E-fibre glass fabrics:
- having a weight of 20 g/m² or more, but not more than 214 g/m²,
- impregnated with silane,
- in rolls,
- having a humidity content by weight of 0.13% or less, and
- having not more than 3 hollow fibres out of 100 000 fibres,
for the exclusive use in the manufacture of prepregs and copper clad laminates20%6.00 %m²7019650070 -
Other
-
Fabrics of continuous filament glass fibre rovings, whether or not stitched, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Other20%6.00 %7019650085
-
Fabrics of continuous filament glass fibre rovings, whether or not stitched, excluding products which are impregnated or pre-impregnated (pre-preg)
-
-
Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30°c and 120°c (measured according to ipc-tm-650) of:
-
Open woven fabrics of a width exceeding 30 cm
701966
-
Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m² (± 10 g/m²) of a type used in rolling insect screens with fixed frames20%6.00 %m²7019660010
-
Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30°c and 120°c (measured according to ipc-tm-650) of:
- 10ppm per°c or more but not more than 12ppm per°c in the length and width, and
- 20ppm per°c or more but not more than 30ppm per°c in the thickness, with a glass transition temperature of 152°c or more but not more than 153°c (measured according ipc-tm-650)-
Open mesh fabrics of glass fibres, of a cell size of more than 1.8 mm both in length and in width and weighting more than 35 g/m², excluding fibreglass discs
-
Other20%6.00 %7019660019
-
Open mesh fabrics of glass fibres, of a cell size of more than 1.8 mm both in length and in width and weighting more than 35 g/m², excluding fibreglass discs
-
Prepreg sheets or rolls containing polyimide resin
-
Other
-
Open mesh fabrics of glass fibres, of a cell size of more than 1.8 mm both in length and in width and weighing more than 35 g/m², excluding fibreglass discs20%6.00 %m²7019660050
-
Other
-
Fabrics of continuous filament glass fibre rovings, whether or not stitched, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Other20%6.00 %7019660085
-
Fabrics of continuous filament glass fibre rovings, whether or not stitched, excluding products which are impregnated or pre-impregnated (pre-preg)
-
-
-
Other
701969
-
Stitched fabrics and needled fabrics
70196910
-
Fabrics of stitched continuous filament glass fibre rovings or yarns, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Other20%4.00 %7019691085
-
Fabrics of stitched continuous filament glass fibre rovings or yarns, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Other
70196990
-
Open mesh fabrics of glass fibres, of a cell size of more than 1.8 mm both in length and in width and weighting more than 35 g/m², excluding fibreglass discs
-
Other
-
Fabrics of continuous filament glass fibre rovings or yarns, whether or not stitched, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Other20%6.00 %m²7019699085
-
Fabrics of continuous filament glass fibre rovings or yarns, whether or not stitched, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Open mesh fabrics of glass fibres, of a cell size of more than 1.8 mm both in length and in width and weighting more than 35 g/m², excluding fibreglass discs
-
Stitched fabrics and needled fabrics
-
Closed woven fabrics of rovings
-
Chemically bonded fabrics
-
Veils (thin sheets)
701971
-
Other closed fabrics
701972
-
Other open fabrics20%4.00 %7019730000
-
Veils (thin sheets)
-
Glass wool and articles of glass wool
701980
-
Boards, mattresses and similar products
70198010
-
Boards and similar non-woven products of low moisture absorption capacity, intended for certain types of aircraft20% or 0%4.00 %7019801020
-
Vacuum insulated panel consisting of hermetic aluminum foil and stiff core, without air inside, used for thermal reinforcement of fridges and freezers and combination of them, with:
-a glass wool filling,
-a thickness of 5.6 mm or more but not more than 35 mm,
-a length of 195 mm or more but not more than 1 875 mm,
-a width of 155 mm or more but not more than 545 mm,
-a thermal conductivity lower than or equal to 2.5 mw/mk,
-an internal pressure below 1.0 pa,
-an ambient operating temperature of -50 ℃ or more but not more than 80 ℃20%4.00 %7019801040 -
Other20%4.00 %7019801090
-
-
Other
70198090
-
Boards, mattresses and similar products
-
Other
701990
-
High modulus glass cord (k) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (hnbr)20%6.00 %7019900030
-
Insulating rigid panels made by vacuum compression of glass fibres wrapped in protective gas-tight film, for use in the manufacture of refrigerators and freezers and their combinations20%6.00 %7019900050
-
Vacuum insulation panel, consisting of a gas-tight aluminum foil housing surrounding a rigid, air-free core with:
- a glass fiber filling,
- a thickness of 5.6mm or more but not more than 32.4mm,
- a length of 195mm or more but not more than 1 835mm,
- a width of 155mm or more but not more than 545mm,
- a thermal conductivity lower than or equal to 2.5 mw/mk,
- an internal pressure below 1.0 pa,
- an ambient temperature during operation of -50 ℃ or more but not more than 80 ℃20%6.00 %7019900060 -
Other
-
Fabrics of stitched continuous filament glass fibre rovings or yarns, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Other20%6.00 %7019900085
-
Fabrics of stitched continuous filament glass fibre rovings or yarns, excluding products which are impregnated or pre-impregnated (pre-preg)
-
Heading 7019 - Glass fibres (including glass wool) and articles thereof (for example, yarn, rovings, woven fabrics)
- Heading
- 7019
- Classification
- Glass fibres (including glass wool) and articles thereof (for example, yarn, rovings, woven fabrics)
There are 128 commodities in this category. Choose the commodity code that best matches your goods to see more information. If your item is not listed by name, it may be shown under what it's used for, what it's made from or 'Other'.
There are important notes for classifying your goods shown further down this page
| Code | Description |
|---|---|
| TN207 | The Democratic People's Republic of Korea (Sanctions) (EU Exit) Regulations 2019 impose trade restrictions on certain goods, technology and services. Please refer to sanctions guidance. You may need a licence from the Department for Business and Trade. |
| TN209 | The Iran (Sanctions) (Nuclear) (EU Exit) Regulations 2019 impose trade restrictions on certain goods, technology and services. Please refer to sanctions guidance. You may need a licence from the Department for Business and Trade. |
| TN701 |
According to the Council Regulation (EU) No 692/2014 (OJ L183, p. 9), as retained in UK Law, it shall be prohibited to import into European Union goods originating in Crimea or Sevastopol. The prohibition shall not apply in respect of: (a) the execution until 26 September 2014, of trade contracts concluded before 25 June 2014, or of ancillary contracts necessary for the execution of such contracts, provided that the natural or legal persons, entity or body seeking to perform the contract have notified, at least 10 working days in advance, the activity or transaction to the competent authority of the Member State in which they are established. (b) goods originating in Crimea or Sevastopol which have been made available to the Ukrainian authorities for examination, for which compliance with the conditions conferring entitlement to preferential origin has been verified and for which a certificate of origin has been issued in accordance with Regulation (EU) No 978/2012 and Regulation (EU) No 374/2014, as retained in UK Law, or in accordance with the EU-Ukraine Association Agreement |
Chapter notes
-
This chapter does not cover:
-
a. goods of heading 3207 (for example, vitrifiable enamels and glazes, glass frit, other glass in the form of powder, granules or flakes);
-
b. articles of Chapter 71 (for example, imitation jewellery);
-
c. optical fibre cables of heading 8544, electrical insulators (heading 8546) or fittings of insulating material of heading 8547;
-
d. front windscreens (windshields), rear windows and other windows, framed, for vehicles of Chapter 86 to Chapter 88;
-
e. front windscreens (windshields), rear windows and other windows, whether or not framed, incorporating heating devices or other electrical or electronic devices, for vehicles of Chapter 86 to Chapter 88;
-
f. optical fibres, optically worked optical elements, hypodermic syringes, artificial eyes, thermometers, barometers, hydrometers or other articles of Chapter 90;
-
g. luminaires and lighting fittings, illuminated signs, illuminated nameplates or the like, having a permanently fixed light source, or parts thereof of heading 9405;
-
h. toys, games, sports requisites, Christmas tree ornaments or other articles of Chapter 95 (excluding glass eyes without mechanisms for dolls or for other articles of Chapter 95); or
-
ij. buttons, fitted vacuum flasks, scent or similar sprays or other articles of Chapter 96.
-
-
For the purposes of heading 7003, 7004 and 7005:
-
a. glass is not regarded as ‘worked’ by reason of any process it has undergone before annealing;
-
b. cutting to shape does not affect the classification of glass in sheets;
-
c. the expression ‘absorbent, reflecting or non-reflecting layer’ means a microscopically thin coating of metal or of a chemical compound (for example, metal oxide) which absorbs, for example, infra-red light or improves the reflecting qualities of the glass while still allowing it to retain a degree of transparency or translucency; or which prevents light from being reflected on the surface of the glass.
-
-
The products referred to in heading 7006 remain classified in that heading, whether or not they have the character of articles.
-
For the purposes of heading 7019, the expression ‘glass wool’ means:
-
a. mineral wools with a silica (SiO2) content not less than 60% by weight;
-
b. mineral wools with a silica (SiO2) content less than 60% but with an alkaline oxide (K2O or Na2O) content exceeding 5% by weight or a boric oxide (B2O3) content exceeding 2% by weight.
Mineral wools which do not comply with the above specifications fall in heading 6806.
-
-
Throughout the nomenclature, the expression ‘glass’ includes fused quartz and other fused silica.
Subheading note
- For the purposes of subheadings 7013 22, 7013 33, 7013 41 and 7013 91, the expression ‘lead crystal’ means only glass having a minimum lead monoxide (PbO) content by weight of 24%.
General Rules for the Interpretation of goods
Classification of goods in the Tariff shall be governed by the following principles:
Rule 1
The titles of sections, chapters and sub-chapters are provided for ease of reference only. For legal purposes, classification shall be determined according to the terms of the headings and any relative section or chapter notes and, provided such headings or notes do not otherwise require, according to the following provisions.
Rule 2
- Any reference in a heading to an article shall be taken to include a reference to that article incomplete or unfinished, provided that, as presented, the incomplete or unfinished article has the essential character of the complete or finished article. It shall also be taken to include a reference to that article complete or finished (or falling to be classified as complete or finished by virtue of this rule), presented unassembled or disassembled.
- Any reference in a heading to a material or substance shall be taken to include a reference to mixtures or combinations of that material or substance with other materials or substances. Any reference to goods of a given material or substance shall be taken to include a reference to goods consisting wholly or partly of such material or substance. The classification of goods consisting of more than one material or substance shall be according to the principles of rule 3.
Rule 3
When, by application of rule 2(b) or for any other reason, goods are prima facie classifiable under two or more headings, classification shall be effected as follows:
- the heading which provides the most specific description shall be preferred to headings providing a more general description. However, when two or more headings each refer to part only of the materials or substances contained in mixed or composite goods or to part only of the items in a set put up for retail sale, those headings are to be regarded as equally specific in relation to those goods, even if one of them gives a more complete or precise description of the goods;
- mixtures, composite goods consisting of different materials or made up of different components, and goods put up in sets for retail sale, which cannot be classified by reference to 3(a), shall be classified as if they consisted of the material or component which gives them their essential character, insofar as this criterion is applicable;
- when goods cannot be classified by reference to 3(a) or (b), they shall be classified under the heading which occurs last in numerical order among those which equally merit consideration.
Goods which cannot be classified in accordance with the above rules shall be classified under the heading appropriate to the goods to which they are most akin.
Rule 5
In addition to the foregoing provisions, the following rules shall apply in respect of the goods referred to therein:
- camera cases, musical instrument cases, gun cases, drawing-instrument cases, necklace cases and similar containers, specially shaped or fitted to contain a specific article or set of articles, suitable for long-term use and presented with the articles for which they are intended, shall be classified with such articles when of a kind normally sold therewith. This rule does not, however, apply to containers which give the whole its essential character;
- subject to the provisions of rule 5(a), packing materials and packing containers ( 1 ) presented with the goods therein shall be classified with the goods if they are of a kind normally used for packing such goods. However, this provision is not binding when such packing materials or packing containers are clearly suitable for repetitive use.
Rule 6
For legal purposes, the classification of goods in the subheadings of a heading shall be determined according to the terms of those subheadings and any related subheading notes and, mutatis mutandis, to the above rules, on the understanding that only subheadings at the same level are comparable. For the purposes of this rule, the relative section and chapter notes also apply, unless the context requires otherwise.