Contents
Importing into the UK
Select a country to view country-specific import information.
You can check if preferential tariff treatments apply to the import of this specific product in the Origin tab.
Import controls
| Country | Measure type | Conditions | Legal base | Footnotes |
|---|---|---|---|---|
| Russia (RU) | Restriction on entry into free circulation | 2023 No. 440 | ||
| Ukraine (UA) | Restriction on entry into free circulation | S.I. 2022/395 |
Import duties
The table below lists the import duties that apply to the import of commodity 3926300090.
Use our tariff duty calculator to work out the duties and taxes applicable to the import of commodity 3926 3000 90
Click on a measure type to find out more about the measure and the preference code to be used on declarations.
Trade remedies, safeguards and retaliatory duties
| Country | Measure type | Duty rate | Conditions | Legal base | Footnotes |
|---|---|---|---|---|---|
| Belarus (BY) | Additional duties | 35.00% | 2022 No. 833 | ||
| Russia (RU) | Additional duties | 35.00% | 2022 No. 833 |
Suspensions
| Country | Measure type | Duty rate | Conditions | Legal base | Footnotes |
|---|---|---|---|---|---|
| All countries (1011) | Autonomous tariff suspension | 0.00% | 2020 No. 1435 | ||
| All countries (1011) | Autonomous suspension under authorised use | 0.00% | 2020 No. 1435 | ||
| All countries (1011) | Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms | 0.00% | 2020 No. 1431 | ||
| All countries (1011) | Airworthiness tariff suspension | 0.00% |
Import VAT and excise
- Excise duties are not chargeable on this commodity.
| Country | Measure type | Duty rate | Conditions | Legal base | Footnotes |
|---|---|---|---|---|---|
| Areas subject to VAT or Excise (1400) | Value added tax Standard rate | 20.00% |
|
Quota order number
This quota is not available on the selected date.
Exporting from the UK
The commodity code for exporting and Intrastat reporting (opens in new tab) is 3926 3000.
UK export controls
| Country | Measure type | Duty rate | Conditions | Legal base | Footnotes |
|---|---|---|---|---|---|
| Russia (RU) | Restriction on export | S.I. 2019/855 |
Check duties and customs procedures for exporting goods
Find information about how to move goods from the UK to the rest of the world.
Use this service to check:
- rules and restrictions
- tax and duty rates
- what exporting documents you need
This service is only available in the UK due to licencing restrictions;
Origin allows for various policy measures to be implemented and for duties to be calculated.
There are two types of origin, subject to different rules, which may affect your trade.
Preferential rules of origin
Products which meet all preferential rules of origin (for countries where the UK has trade agreements in place) may be eligible for reduced or zero duty rates.
Non-preferential rules of origin
Products with non-preferential rules of origin may incur commercial policy measures, such as:
- anti-dumping duties
- countervailing duties
- trade embargoes
- safeguarding measures
- quantitative restrictions
- tariff quotas
View rules for determining non-preferential origin (opens in new tab)
Notes for commodity 3926300090
Chapter notes
-
Throughout the nomenclature, the expression ‘plastics’ means those materials of heading 3901 to 3914 which are or have been capable, either at the moment of polymerisation or at some subsequent stage, of being formed under external influence (usually heat and pressure, if necessary, with a solvent or plasticiser) by moulding, casting, extruding, rolling or other process into shapes which are retained on the removal of the external influence.
Throughout the nomenclature, any reference to ‘plastics’ also includes vulcanised fibre. The expression, however, does not apply to materials regarded as textile materials of Section XI.
-
This chapter does not cover:
(a) lubricating preparations of heading 2710 or 3403;
(b) waxes of heading 2712 or 3404;
(c) separate chemically defined organic compounds (Chapter 29);
(d) heparin or its salts (heading 3001);
(e) solutions (other than collodions) consisting of any of the products specified in heading 3901 to 3913 in volatile organic solvents when the weight of the solvent exceeds 50 % of the weight of the solution (heading 3208); stamping foils of heading 3212;
(f) organic surface-active agents or preparations of heading 3402;
(g) run gums or ester gums (heading 3806);
(h) prepared additives for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils (heading 3811);
(ij) prepared hydraulic fluids based on polyglycols, silicones or other polymers of Chapter 39 (heading 3819);
(k) diagnostic or laboratory reagents on a backing of plastics (heading 3822);
(l) synthetic rubber, as defined for the purposes of Chapter 40, or articles thereof;
(m) saddlery or harness (heading 4201) or trunks, suitcases, handbags or other containers of heading 4202;
(n) plaits, wickerwork or other articles of Chapter 46;
(o) wallcoverings of heading 4814;
(p) goods of Section XI (textiles and textile articles);
(q) articles of Section XII (for example, footwear, headgear, umbrellas, sun umbrellas, walking sticks, whips, riding-crops or parts thereof);
(r) imitation jewellery of heading 7117;
(s) articles of Section XVI (machines and mechanical or electrical appliances);
(t) parts of aircraft or vehicles of Section XVII;
(u) articles of Chapter 90 (for example, optical elements, spectacle frames, drawing instruments);
(v) articles of Chapter 91 (for example, clock or watch cases);
(w) articles of Chapter 92 (for example, musical instruments or parts thereof);
(x) articles of Chapter 94 (for example, furniture, luminaires and lighting fittings, illuminated signs, prefabricated buildings);
(y) articles of Chapter 95 (for example, toys, games, sports requisites); or
(z) articles of Chapter 96 (for example, brushes, buttons, slide fasteners, combs, mouthpieces or stems for smoking pipes, cigarette- holders or the like, parts of vacuum flasks or the like, pens, propelling pencils, and monopods, bipods, tripods and similar articles).
-
Headings 3901 to 3911 apply only to goods of a kind produced by chemical synthesis, falling in the following categories:
(a) liquid synthetic polyolefins of which less than 60 % by volume distils at 300 °C, after conversion to 1013 mbar when a reduced- pressure distillation method is used (heading 3901 and 3902);
(b) resins, not highly polymerised, of the coumarone-indene type (heading 3911);
(c) other synthetic polymers with an average of at least five monomer units;
(d) silicones (heading 3910);
(e) resols (heading 3909) and other prepolymers.
-
The expression ‘copolymers’ covers all polymers in which no single monomer unit contributes 95 % or more by weight to the total polymer content.
For the purposes of this chapter, except where the context otherwise requires, copolymers (including copolycondensates, co- polyaddition products, block copolymers and graft copolymers) and polymer blends are to be classified in the heading covering polymers of that comonomer unit which predominates by weight over every other single comonomer unit. For the purposes of this note, constituent comonomer units of polymers falling in the same heading shall be taken together.
If no single comonomer unit predominates, copolymers or polymer blends, as the case may be, are to be classified in the heading which occurs last in numerical order among those which equally merit consideration.
-
Chemically modified polymers, that is those in which only appendages to the main polymer chain have been changed by chemical reaction, are to be classified in the heading appropriate to the unmodified polymer.
This provision does not apply to graft copolymers.
-
In heading 3901 to 3914, the expression ‘primary forms’ applies only to the following forms:
(a) liquids and pastes, including dispersions (emulsions and suspensions) and solutions;
(b) blocks of irregular shape, lumps, powders (including moulding powders), granules, flakes and similar bulk forms.
-
Heading 3915 does not apply to waste, parings and scrap of a single thermoplastic material, transformed into primary forms (heading 3901 to 3914).
-
For the purposes of heading 3917, the expression ‘tubes, pipes and hoses’ means hollow products, whether semi-manufactured or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes).
This expression also includes sausage casings and other lay-flat tubing. However, except for the last mentioned, those having an internal cross section other than round, oval, rectangular (in which the length does not exceed one-and-a-half times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes.
-
For the purposes of heading 3918, the expression ‘wall or ceiling coverings of plastics’ applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated.
-
In heading 3920 and 3921, the expression ‘plates, sheets, film, foil and strip’ applies only to plates, sheets, film, foil and strip (other than those of Chapter 54) and to blocks of regular geometric shape, whether or not printed or otherwise surface-worked, uncut or cut into rectangles (including squares) but not further worked (even if when so cut they become articles ready for use).
-
Heading 3925 applies only to the following articles, not being products covered by any of the earlier headings of sub-chapter II: (a) reservoirs, tanks (including septic tanks), vats and similar containers, of a capacity exceeding 300 litres;
(b) structural elements used, for example, in floors, walls or partitions, ceilings or roofs;
(c) gutters and fittings therefor;
(d) doors, windows and their frames and thresholds for doors;
(e) balconies, balustrades, fencing, gates and similar barriers;
(f) shutters, blinds (including venetian blinds) and similar articles and parts and fittings thereof;
(g) large-scale shelving for assembly and permanent installation, for example, in shops, workshops, warehouses;
(h) ornamental architectural features, for example, flutings, cupolas, dovecotes; and
(ij) fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings, for example, knobs, handles, hooks, brackets, towel rails, switch-plates and other protective plates.
Subheading notes
-
Within any one heading of this chapter, polymers (including copolymers) and chemically modified polymers are to be classified according to the following provisions:
(a) where there is a subheading named ‘Other’ in the same series:
(1) the designation in a subheading of a polymer by the prefix ‘poly’ (for example, polyethylene and polyamide-6,6) means that the constituent monomer unit or monomer units of the named polymer taken together must contribute 95 % or more by weight of the total polymer content;
(2) the copolymers named in subheadings 3901 30, 3901 40, 3903 20, 3903 30 and 3904 30 are to be classified in those subheadings, provided that the comonomer units of the named copolymers contribute 95 % or more by weight of the total polymer content;
(3) chemically modified polymers are to be classified in the subheading named ‘Other’, provided that the chemically modified polymers are not more specifically covered by another subheading;
(4) polymers not meeting (1), (2) or (3) above, are to be classified in the subheading, among the remaining subheadings in the series, covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series of subheadings under consideration are to be compared;
(b) where there is no subheading named ‘Other’ in the same series:
(1) polymers are to be classified in the subheading covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series under consideration are to be compared;
(2) chemically modified polymers are to be classified in the subheading appropriate to the unmodified polymer.
Polymer blends are to be classified in the same subheading as polymers of the same monomer units in the same proportions.
-
For the purposes of subheading 3920 43, the term ‘plasticisers’ includes secondary plasticisers.
Additional chapter notes
-
Where the woven, knitted or crocheted fabrics, felt or nonwovens are present merely for reinforcing purposes, gloves, mittens or mitts impregnated, coated or covered with cellular plastics belong to Chapter 39, even if they are:
-
made up from woven, knitted or crocheted fabrics (other than those of heading 5903), felt or nonwovens impregnated, coated or covered with cellular plastics, or
-
made up from unimpregnated, uncoated or uncovered woven, knitted or crocheted fabrics, felt or nonwovens and subsequently impregnated, coated or covered with cellular plastics.
-
-
Chapter 39 includes articles comprising a bulking agent mixed with resin. The resin, by giving shape and rigidity, gives an article its essential character.
For example, code 3922 20 00 includes lavatory seats consisting of approximately 85% wood flour, which is a powder obtained from grinding sawdust, shavings or other wood waste, and approximately 15% phenolic resin. The article is made by compressing the wood flour and resin powder, which includes a hardener, in a mould which is then heated, curing the article and making it rigid. In curing, the resin is melted and reacts with the hardener. The lavatory seat is classified as an article of plastics within code 3922 20 00 as the resin gives the article its shape and rigidity while the wood flour acts as a filler.
Section notes
-
Goods put up in sets consisting of two or more separate constituents, some or all of which fall in this section and are intended to be mixed together to obtain a product of Section VI or VII, are to be classified in the heading appropriate to that product, provided that the constituents are:
a. having regard to the manner in which they are put up, clearly identifiable as being intended to be used together without first being repacked;
b. presented together; and
c. identifiable, whether by their nature or by the relative proportions in which they are present, as being complementary one to another.
-
Except for the goods of heading 3918 or 3919, plastics, rubber, and articles thereof, printed with motifs, characters or pictorial representations, which are not merely subsidiary to the primary use of the goods, fall in Chapter 49.
General Rules for the Interpretation of goods
Classification of goods in the Tariff shall be governed by the following principles:
Rule 1
The titles of sections, chapters and sub-chapters are provided for ease of reference only. For legal purposes, classification shall be determined according to the terms of the headings and any relative section or chapter notes and, provided such headings or notes do not otherwise require, according to the following provisions.
Rule 2
- Any reference in a heading to an article shall be taken to include a reference to that article incomplete or unfinished, provided that, as presented, the incomplete or unfinished article has the essential character of the complete or finished article. It shall also be taken to include a reference to that article complete or finished (or falling to be classified as complete or finished by virtue of this rule), presented unassembled or disassembled.
- Any reference in a heading to a material or substance shall be taken to include a reference to mixtures or combinations of that material or substance with other materials or substances. Any reference to goods of a given material or substance shall be taken to include a reference to goods consisting wholly or partly of such material or substance. The classification of goods consisting of more than one material or substance shall be according to the principles of rule 3.
Rule 3
When, by application of rule 2(b) or for any other reason, goods are prima facie classifiable under two or more headings, classification shall be effected as follows:
- the heading which provides the most specific description shall be preferred to headings providing a more general description. However, when two or more headings each refer to part only of the materials or substances contained in mixed or composite goods or to part only of the items in a set put up for retail sale, those headings are to be regarded as equally specific in relation to those goods, even if one of them gives a more complete or precise description of the goods;
- mixtures, composite goods consisting of different materials or made up of different components, and goods put up in sets for retail sale, which cannot be classified by reference to 3(a), shall be classified as if they consisted of the material or component which gives them their essential character, insofar as this criterion is applicable;
- when goods cannot be classified by reference to 3(a) or (b), they shall be classified under the heading which occurs last in numerical order among those which equally merit consideration.
Goods which cannot be classified in accordance with the above rules shall be classified under the heading appropriate to the goods to which they are most akin.
Rule 5
In addition to the foregoing provisions, the following rules shall apply in respect of the goods referred to therein:
- camera cases, musical instrument cases, gun cases, drawing-instrument cases, necklace cases and similar containers, specially shaped or fitted to contain a specific article or set of articles, suitable for long-term use and presented with the articles for which they are intended, shall be classified with such articles when of a kind normally sold therewith. This rule does not, however, apply to containers which give the whole its essential character;
- subject to the provisions of rule 5(a), packing materials and packing containers ( 1 ) presented with the goods therein shall be classified with the goods if they are of a kind normally used for packing such goods. However, this provision is not binding when such packing materials or packing containers are clearly suitable for repetitive use.
Rule 6
For legal purposes, the classification of goods in the subheadings of a heading shall be determined according to the terms of those subheadings and any related subheading notes and, mutatis mutandis, to the above rules, on the understanding that only subheadings at the same level are comparable. For the purposes of this rule, the relative section and chapter notes also apply, unless the context requires otherwise.
| Code | Description |
|---|---|
| TN701 |
According to the Council Regulation (EU) No 692/2014 (OJ L183, p. 9), as retained in UK Law, it shall be prohibited to import into European Union goods originating in Crimea or Sevastopol. The prohibition shall not apply in respect of: (a) the execution until 26 September 2014, of trade contracts concluded before 25 June 2014, or of ancillary contracts necessary for the execution of such contracts, provided that the natural or legal persons, entity or body seeking to perform the contract have notified, at least 10 working days in advance, the activity or transaction to the competent authority of the Member State in which they are established. (b) goods originating in Crimea or Sevastopol which have been made available to the Ukrainian authorities for examination, for which compliance with the conditions conferring entitlement to preferential origin has been verified and for which a certificate of origin has been issued in accordance with Regulation (EU) No 978/2012 and Regulation (EU) No 374/2014, as retained in UK Law, or in accordance with the EU-Ukraine Association Agreement |
Autonomous tariff suspension for All countries
From 3 May 2025 to 31 Dec 2026
Meet the following condition and supply the relevant document code(s) on your declaration.
| Document code | Requirement | Action |
|---|---|---|
| 9Y12 |
Duty suspension of 0% applies - see DS footnote for coverage. Please do not use if the MFN import duty rate is 0%. |
Import allowed
|
Guidance for completing CDS Data Element 2/3
| Document code | CDS guidance |
|---|---|
| 9Y12 | Complete statement: ‘Normal business suspensions’. Use of this code constitutes a legal declaration that the goods qualify for normal business suspension. Sufficient evidence must be held in records to demonstrate eligibility for the suspensions and must be produced on demand. - No document status code is required. |
| Code | Description |
|---|---|
| DS222 |
This Suspension only applies to: • Injection moulded vehicle badges, made of a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705 or • Tilt adjusters to prevent metal to metal friction, of a kind for use in the manufacture of motor vehicle seats; or • Motor plate housings, of a kind for use in the manufacture of motor vehicle seats; or • Motor plate housings, of a kind for use in the manufacture of motor vehicle window mechanisms; or • Plastic friction reducers used between the seatpan mechanism and tilt adjuster, of a kind for use in the manufacture of motor vehicle seats or • Plastic reinforcements to the seatpan for structural integrity, of a kind for use in the manufacture of motor vehicle seats; or • Plastic limit stops, of a kind for use in the manufacture of motor vehicle seats; or • Plastic inserts, of a kind for use in the manufacture of motor vehicle seats; or • Plastic latch releases used in the backrest of second row seats, of a kind for use in the manufacture of motor vehicle seats, falling within this commodity code. |
Autonomous suspension under authorised use for All countries
From 14 Apr 2025 to 31 Dec 2028
Meet one of the following conditions and supply the relevant document code(s) on your declaration.
| Document code | Requirement | Action |
|---|---|---|
| N990 |
EUS - Authorisation for the use of end use procedure (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446) |
Apply the mentioned duty
|
|
No document provided |
Declared subheading not allowed
|
Guidance for completing CDS Data Element 2/3
| Document code | CDS guidance |
|---|---|
| N990 | Provide the authorisation decision number for the Authorised Use / End Use authorisation in the format: • 2 digit code identifying the member state of authorisation, e.g., GB. • 3 digit code indicating that an Authorised Use / End Use authorisation is held, i.e., EUS (Authorisation code) • followed by the authorisation reference number. For status code XW: Enter text ‘Waiver claimed’ in the document reason field. - No document status code is required. |
| Code | Description |
|---|---|
| DS637 |
This suspension only applies to:
falling under this commodity code. |
| EU001 | Suspension of duties is subject to Authorised-Use customs supervision in accordance with Chapter 4 of The Customs (Special Procedures and Outward Processing) (EU Exit) Regulations 2018 (UK Statutory Instruments 2018 No. 1249) |
| TM861 | This suspension does not apply to any mixtures, preparations or products made up of different components containing these products. |
Suspension - goods for certain categories of ships, boats and other vessels and for drilling or production platforms for All countries
From 1 Jan 2021
Meet one of the following conditions and supply the relevant document code(s) on your declaration.
| Document code | Requirement | Action |
|---|---|---|
| C990 |
End use authorisation ships and platforms (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446) |
Apply the mentioned duty
|
|
No document provided |
Measure not applicable
|
Guidance for completing CDS Data Element 2/3
| Document code | CDS guidance |
|---|---|
| C990 | Provide the authorisation decision number for the Authorised Use/End-Use authorisation ships and platforms in the format: • 2 digit code identifying the member state of authorisation, e.g., GB. • 3 digit code indicating that an Authorised Use/End-Use authorisation ships and platforms is held, i.e., EUS (Authorisation code) • followed by the authorisation reference number. C990 must be used in conjunction with DE 1/11 code 1SW - No document status code is required. |
| Code | Description |
|---|---|
| EU003 | According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories of ships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods. |
| TM510 |
1. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10; 8901 30 10; 8901 90 10; 8902 00 10; 8903 91 10; 8903 92 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels. 2. Customs duties shall be suspended in respect of: (a) goods intended for incorporation in drilling or production platforms: (1) fixed, of subheading ex 8430 49, operating in or outside the territorial sea of Member States, or (2) floating or submersible, of subheading 8905 20, for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for equipping the said platforms. (b) tubes, pipes, cables and their connection pieces, linking these drilling or production platforms to the mainland. |
Airworthiness tariff suspension for All countries
From 1 Jan 2021
Meet one of the following conditions and supply the relevant document code(s) on your declaration.
| Document code | Requirement | Action |
|---|---|---|
| C119 |
Authorised Release Certificate — EASA Form 1 (Appendix I to Annex I to Regulation (EU) No 748/2012), or equivalent certificate |
Apply the mentioned duty
|
|
No document provided |
Measure not applicable
|
Guidance for completing CDS Data Element 2/3
| Document code | CDS guidance |
|---|---|
| C119 | Enter the reference number of the Authorised Release Certificate formerly referred to as Certificate of airworthiness or equivalent certificate. Where a sequentially numbered range of certificates cover the goods enter the lowest to the highest reference numbers of the certificates concerned i.e., document code + 0054037-0054047: status code. Where certificates are not sequentially numbered enter the reference number of each certificate concerned. Faxed copy not acceptable. - Use one of the following document status codes: AE, GE |
| Code | Description |
|---|---|
| CD333 |
The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to Authorised Release Certificates are listed in Annex II to the Regulation (EU) 2018/1517, as retained in UK Law |
Developing Countries Trading Scheme (DCTS) - Standard and Enhanced Preferences
Declaring your proof of origin
| CDS Data Element (DE) | What you must include |
|---|---|
| DE 2/3 |
You must include one of the following document codes, as appropriate:
|
| DE 4/17 |
The data element must include a preference code in the 200 series. |
Developing Countries Trading Scheme (DCTS) - Standard and Enhanced Preferences
Declaring your proof of origin
| CDS Data Element (DE) | What you must include |
|---|---|
| DE 2/3 |
You must include one of the following document codes, as appropriate:
|
| DE 4/17 |
The data element must include a preference code in the 200 series. |
Developing Countries Trading Scheme (DCTS) - Comprehensive Preferences
Declaring your proof of origin
| CDS Data Element (DE) | What you must include |
|---|---|
| DE 2/3 |
You must include one of the following document codes, as appropriate:
|
| DE 4/17 |
The data element must include a preference code in the 200 series. |
| Code | Description |
|---|---|
| 03020 | UK VAT standard rate |
Tariff preference for CPTPP All Members
From 24 Dec 2024 to 21 Jun 2026
Meet the following condition and supply the relevant document code(s) on your declaration.
| Document code | Requirement | Action |
|---|---|---|
| 9081 |
Goods declared under the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) |
Import allowed
|
Guidance for completing CDS Data Element 2/3
| Document code | CDS guidance |
|---|---|
| 9081 | In the document ID field, enter the appropriate code 9U01, 9U02 or 9U03 to indicate which document code has been used for the CPTPP Certification of Origin. Note: one of the document codes 9U01, 9U02 or 9U03 must be declared in addition to document code 9081 - Use one of the following document status codes: JP |
| Code | Description |
|---|---|
| RT001 |
To claim preference under the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP), Document Code 9081 must be declared in D.E. 2/3 in addition to the appropriate Certification of Origin Document Code detailed below:
Information on declaring these Document Codes in D.E. 2/3 can be found in the CDS guidance on GOV.UK The Minimum Data Requirements for what should be included in a Certification of Origin is set out in Annex I of the CPTPP Origin Reference Document (available on the GOV.UK link). |
Free Trade Agreement between the United Kingdom of Great Britain and Northern Ireland and Australia
Declaring your proof of origin
| CDS Data Element (DE) | What you must include |
|---|---|
| DE 2/3 |
You must include one of the following document codes, as appropriate:
Codes U110 and U111 must be declared with one of the following document status codes (opens in new window): AE, AF, AG, AP, AS, AT, GE, GP, HP, JE, JP, LE, LP, UA, UE, UP, US, XB. |
| DE 4/17 |
The data element must include a preference code in the 300 series. |
| DE 5/16 |
The data element must be completed with the country of preferential origin. |
Additional duties for Belarus
From 20 Jul 2022
Meet one of the following conditions and supply the relevant document code(s) on your declaration.
| Document code | Requirement | Action |
|---|---|---|
| 9018 |
Goods of Belarusian or Russian origin exported from any country before 20th July 2022. |
Measure not applicable
|
|
No document provided |
Apply the mentioned duty
|
Guidance for completing CDS Data Element 2/3
| Document code | CDS guidance |
|---|---|
| 9018 | Complete statement: Russian Exports: ‘Russian export before 20/7/2022’ Belarusian Exports: ‘Belarus export before 20/7/2022’ Use of this code constitutes a legal declaration that the goods were exported from Russia and/or Belarus before 20th July 2022 and qualify for exemption from the additional duties imposed under The Customs (Additional Duty) (Russia and Belarus) Amendment Regulations 2022. Sufficient evidence must be held in records to demonstrate eligibility for this exemption, which must be produced on demand. - No document status code is required. |
| Code | Description |
|---|---|
| SN034 | Goods of Russian or Belarusian origin that were exported out of Russia and Belarus before 20 July 2022 as per The Customs (Additional Duty) (Russia and Belarus) Amendment Regulations 2022 are exempt from these additional duties and document code 9018 should be used. You may need to provide commercial evidence to HMRC when using this Document Code. |
Tariff preference for Israel
From 1 Sep 2025
Meet one of the following conditions and supply the relevant document code(s) on your declaration.
| Document code | Requirement | Action |
|---|---|---|
| Y864 |
The proof of origin indicates that the production conferring originating status has not taken place in a location within the territories brought under Israeli administration since June 1967. |
Apply the mentioned duty
|
|
No document provided |
Measure not applicable
|
Guidance for completing CDS Data Element 2/3
| Document code | CDS guidance |
|---|---|
| Y864 | Complete statement ‘Originating conditions met’. Use of this code constitutes a legal declaration that the production conferring originating status has not taken place in a location within the territories brought under Israeli administration since June 1967. Sufficient evidence must be held in records to demonstrate the origin of the goods and must be produced on demand. - No document status code is required. |
| Code | Description |
|---|---|
| CD785 | The list of non-eligible locations and their postal codes is available at the following address: List of non-eligible locations |
Free Trade Agreement between the United Kingdom of Great Britain and Northern Ireland and New Zealand
Declaring your proof of origin
| CDS Data Element (DE) | What you must include |
|---|---|
| DE 2/3 |
You must include one of the following document codes, as appropriate:
Codes U110 and U111 must be declared with one of the following document status codes (opens in new window): AE, AF, AG, AP, AS, AT, GE, GP, HP, JE, JP, LE, LP, UA, UE, UP, US, XB. |
| DE 4/17 |
The data element must include a preference code in the 300 series. |
| DE 5/16 |
The data element must be completed with the country of preferential origin. |
Restriction on entry into free circulation for Russia
From 21 Apr 2023
Meet one of the following conditions and supply the relevant document code(s) on your declaration.
| Document code | Requirement | Action |
|---|---|---|
| 9011 |
Goods and technology subject to sanction with a DBT import or export licence |
Import allowed
|
| 9022 |
Goods which are either not subject to sanctions or are entitled to an exemption from sanctions. |
Import allowed
|
| 9038 |
Goods exported from Russia prior to 21st April 2023 that arrive in the UK before 21st May 2023. |
Import allowed
|
Guidance for completing CDS Data Element 2/3
| Document code | CDS guidance |
|---|---|
| 9011 | Enter GBSAN followed by the reference number of the licence. If using more than one licence then a separate 9011 entry in DE 2/3 is required for each licence. Status code AC should only be used as a fallback for when electronic licence functionality is inoperable. - Use one of the following document status codes: AC, EA, EE, EL, EP, ES |
| 9022 | Complete the appropriate statement: For goods not subject to sanctions complete - ‘Not subject to sanctions’. For goods claiming an exemption from sanctions complete - ‘Exempt from sanctions’. Use of this code constitutes a legal declaration that the goods are either not subject to sanctions or are exempt from sanctions. Sufficient evidence must be held in records to demonstrate that the goods are either not subject to sanctions or are entitled to an exemption from sanctions, and this evidence must be produced on demand. - No document status code is required. |
| 9038 | Complete statement ‘Exempt from sanctions’. Use of this code constitutes a legal declaration that the goods are exempt from sanctions on the basis that they had been exported from Russia prior to 21st April 2023 and arrived in the UK before 21st May 2023. Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand. - No document status code is required. |
| Code | Description |
|---|---|
| SN123 |
The Russia (Sanctions) (EU Exit) Regulations 2019 impose trade restrictions on certain goods, technology and services. Some restrictions include trade involving non-government controlled Ukrainian territory. Please refer to sanctions guidance. You may need a licence from the Department for Business and Trade. A licence may be granted for the import into the UK of goods falling under this commodity code if it relates to the execution of obligations arising from contracts concluded before 21 April 2023. For goods exported from Russia prior to 21st April 2023 that arrive in the UK before 21st May 2023, please declare document code 9038. For other exceptions, please declare document code 9022. |
Additional duties for Russia
From 20 Jul 2022
Meet one of the following conditions and supply the relevant document code(s) on your declaration.
| Document code | Requirement | Action |
|---|---|---|
| 9018 |
Goods of Belarusian or Russian origin exported from any country before 20th July 2022. |
Measure not applicable
|
|
No document provided |
Apply the mentioned duty
|
Guidance for completing CDS Data Element 2/3
| Document code | CDS guidance |
|---|---|
| 9018 | Complete statement: Russian Exports: ‘Russian export before 20/7/2022’ Belarusian Exports: ‘Belarus export before 20/7/2022’ Use of this code constitutes a legal declaration that the goods were exported from Russia and/or Belarus before 20th July 2022 and qualify for exemption from the additional duties imposed under The Customs (Additional Duty) (Russia and Belarus) Amendment Regulations 2022. Sufficient evidence must be held in records to demonstrate eligibility for this exemption, which must be produced on demand. - No document status code is required. |
| Code | Description |
|---|---|
| SN034 | Goods of Russian or Belarusian origin that were exported out of Russia and Belarus before 20 July 2022 as per The Customs (Additional Duty) (Russia and Belarus) Amendment Regulations 2022 are exempt from these additional duties and document code 9018 should be used. You may need to provide commercial evidence to HMRC when using this Document Code. |
Restriction on entry into free circulation for Ukraine
From 30 Mar 2022
Meet one of the following conditions and supply the relevant document code(s) on your declaration.
| Document code | Requirement | Action |
|---|---|---|
| 9009 |
Goods originating in non-government controlled Ukrainian territory with a certificate of origin issued by the Ukrainian authorities |
Import/export allowed after control
|
| 9010 |
Goods originating specifically in the non-government controlled areas of Donetsk and Luhansk oblasts if related to an obligation arising from a contract concluded before 23 February 2022: Import allowed subject to these contracts, or ancillary contracts necessary for their execution, being concluded by 24 August 2022, and the Secretary of State for the Department for Business and Trade being informed at least ten working days in advance of this exception being used. |
Import/export allowed after control
|
| 9017 |
Goods exported from an area of Ukraine under the control of the Ukrainian government |
Import allowed
|
Guidance for completing CDS Data Element 2/3
| Document code | CDS guidance |
|---|---|
| 9009 | Complete statement ‘Exempt from prohibition’. Use of this code constitutes a legal declaration that the goods originating in non-government controlled Ukrainian territory are covered by a certificate of origin issued by the Ukrainian authorities and entitled to an exemption from the prohibition on the import of goods originating in the non-government controlled areas of Ukraine . Sufficient evidence must be held in records to demonstrate eligibility for this exemption, which must be produced on demand. - No document status code is required. |
| 9010 | Complete statement ‘Contractual exemption’. Use of this code constitutes a legal declaration that the goods are entitled to an exemption from the prohibition imposed on goods originating in the non-government controlled areas of Donetsk and Luhansk oblasts on the basis that they relate to an obligation arising from a contract concluded before 23 February 2022 and subject to these contracts, or ancillary contracts necessary for their execution, being concluded by 24 August 2022. It is further a legal declaration that the Secretary of State for the Department for Business and Trade was informed at least ten working days in advance of this exception being used. Sufficient evidence must be held in records to demonstrate eligibility for this exception, which must be produced on demand. |
| 9017 | Complete statement ‘From Government Controlled Area’. Use of this code constitutes a legal declaration that the goods were exported from an area of Ukraine which was under the control of the Ukrainian government at the time of export. Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand. - No document status code is required. |
| Code | Description |
|---|---|
| SN008 | The Russia (Sanctions) (EU Exit) Regulations 2019 impose trade restrictions on certain goods, technology and services. Some restrictions include trade involving non-government controlled Ukrainian territory. Please refer to sanctions guidance. You may need a licence from the Department for Business and Trade. |
Restriction on export for Russia
From 15 Dec 2023
Meet one of the following conditions and supply the relevant document code(s) on your declaration.
| Document code | Requirement | Action |
|---|---|---|
| 9011 |
Goods and technology subject to sanction with a DBT import or export licence |
Export allowed
|
| 9022 |
Goods which are either not subject to sanctions or are entitled to an exemption from sanctions. |
Export allowed
|
Guidance for completing CDS Data Element 2/3
| Document code | CDS guidance |
|---|---|
| 9011 | Enter GBSAN followed by the reference number of the licence. If using more than one licence then a separate 9011 entry in DE 2/3 is required for each licence. Status code AC should only be used as a fallback for when electronic licence functionality is inoperable. - Use one of the following document status codes: AC, EA, EE, EL, EP, ES |
| 9022 | Complete the appropriate statement: For goods not subject to sanctions complete - ‘Not subject to sanctions’. For goods claiming an exemption from sanctions complete - ‘Exempt from sanctions’. Use of this code constitutes a legal declaration that the goods are either not subject to sanctions or are exempt from sanctions. Sufficient evidence must be held in records to demonstrate that the goods are either not subject to sanctions or are entitled to an exemption from sanctions, and this evidence must be produced on demand. - No document status code is required. |
| Code | Description |
|---|---|
| SN122 |
The Russia (Sanctions) (EU Exit) Regulations 2019 impose trade restrictions on certain goods, technology and services. Some restrictions include trade involving non-government controlled Ukrainian territory. Please refer to sanctions guidance. You may need a licence from the Department for Business and Trade. For exemptions, please declare document code 9022. |
Do you need help?